Discover our main brands websites

Arkema worldwide

Coatings

NEW Latest Resin and Additive Innovations for More Sustainable UV-Curable Coatings

Dr. Xavier Drujon

  • Key advantages of the solvent-free UV, LED and EB technologies : energy, time, space and monetary savings.
  • Latest innovations for low energy LED curing, self-initiating resins introduction.
  • Renewable-based UV resin possibilities.
To watch the video below, log in by clicking on the video :
Log in to watch the video

RadTech Europe

Deep matt and soft touch coatings via Excimer curing : Monomers & Oligomers selection guide

Dr. Xavier Drujon

  • Explore the excimer curing technology for deep matt and soft-feel coatings.
  • Dedicated oligomers and monomers to enhance surface properties with this technology.
To watch the video below, log in by clicking on the video :
Log in to watch the video

Dielectric performance of UV-curable chemistries for Conformal Coatings

Dr. Neal Pfeiffenberger

  • Overview of conformal coatings, thin polymeric based coatings that encapsulate printed circuit assemblies in order to provide protection from various end use environments.
  • Dielectric testing techniques to quantify and optimize monomers and oligomers for their electronic properties.
To watch the video below, log in by clicking on the video :
Log in to watch the video

High performance (meth)acrylic resins for 3D Printing

Dr. Noémi Feillée

  • Overview and needs of the 3D Printing market.
  • Elastomer materials : generalities and characterization.
  • Characterization of elasticity: custom tensile testing.
To watch the video below, log in by clicking on the video :
Log in to watch the video

Strategies towards reduced migration potential in Graphic Arts

Kevin Demoulin

  • Low migration key pillars.
  • Reactivity enhancement.
  • How to bring the worlds together.
To watch the video below, log in by clicking on the video :
Log in to watch the video

A new liquid photoinitiator for LED curing

Dr. Richard Plenderleith

  • Center of excellence and collaborative innovation for photoinitiators.
  • Thioxanthone chemistry.
  • Novel thioxanthone diesters and diethyl malonate ester.
  • New liquid thioxanthone SPEEDCURE LTX and its curing performance.
To watch the video below, log in by clicking on the video :
Log in to watch the video

Unique label friendly high performance methacrylate solutions for consumer and industrial applications 

Dr. Liza Marasinghe

  • Overview of acrylates vs methacrylates.
  • Mechanical values through practical tests.
To watch the video below, log in by clicking on the video :
Log in to watch the video

Structured Urethane Acrylates and The Use of Controlled Polymer Architecture to Tailor Material Properties (SUA+)

Dr. Donald Herr
  • Structured urethane acrylates and controlled oligomer architecture.
  • Physical and mechanical properties of structured UAs.
To watch the video below, log in by clicking on the video :
Log in to watch the video

3D Printing

Liquid resins for UV-curable 3D printing

Lucile Bonhoure, Dr. Richard Plenderleith and Brian Lamb, Formext 2020
  • Extensive offering to meet new applications and performance demands.
  • Introducing photoinitiators, UV blockers and additives.
  • Hybrid systems.
  • Power of partnerships.
To watch the video below, please log in by clicking on the video : 
Log in to watch the video

Additive manufacturing of continuous fiber & thermoset resins

CF3D® & Arkema
  • Next generation of composites manufacturing.
  • Next generation of materials' solutions.
  • Power of partnership.
To watch the video below, please log in by clicking on the video : 
Log in to watch the video

Material supply chain for 3D printable composites in construction

Mighty Buildings & Arkema
  • Unlocking the next industrial revolution.
  • Photocurable resin solutions.
  • Mighty Buildings' construction technology.
  • New materials development and supply chain optimization.
To watch the video, please log in by clicking on the video : 
Log in to watch the video

EB Curing

High performance EB curing systems: Comparison of UV and EB curing of oligomers and monomers

Dr Xavier Drujon
  • Presentation of a study in which a series of aliphatic urethane acrylates were subjected to EB-induced cure after dilution in reactive diluents.
  •  Benefits of using urethane acrylates for the formulation of EB-curable systems.
To watch the video, please log in by clicking on the video :
Log in to watch the video

Inks & Varnishes

A monomers review: from high functionality towards low viscosity acrylates for inks & varnishes

Kevin Demoulin
  • Overview of our extensive monomers range.
  • More details regarding the links between the chemical structure and the final properties.
  • Ongoing developments to provide solutions addressing the challenging and evolving market trends of the printing industry.
To watch the video, please log in by clicking on the video :
Log in to watch the video

Cationic Curing

Solutions for energy curable cationic formulations

Dr. Richard Plenderleith
  • Introduction to cationic curing, an acid catalyzed polymerization of epoxides using onium salts.
  • Cationic application areas,  including electronics, 3D printing, coatings & inks, and composites.
  • Extensive solutions of cationic photoinitiators and resins for high performance.
To watch the video, please log in by clicking on the video :
Log in to watch the video

Coatings

Partnering for UV Systems

Dr. Xavier Drujon and Justin Lanyon
  • Global Photoinitiator Center of Excellence.
  • New liquid Thioxanthone photoinitiator for LED curing.
  • Focus on sustainability and regulatories with a deep dive on bio-renewable based solutions.

  • New structured urethane acrylates and patented use of controlled polymer architecture to tailor materials properties.

To watch the video, please log in by clicking on the video :
Log in to watch the video

Global Coatings Market and Key Trends

Presented by Orr&Boss Consulting
  • Overview of the global coatings market, including the size and growth rate, sustainability, and the post-pandemic economy.
  • Key trends impacting the industry, such as lightweighting, the use of 3D Printing manufacturing models, and the expected increase in infrastructure stimulus spending globally.
To watch the video, please log in by clicking on the video :
Log in to watch the video

See also

Top