A-Z Index

SARBIO® 5102 is a monofunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis.

Sarbio® 5201 is a difunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis.

SARBIO® 6105 is a monofunctional methacrylic monomer for use in UV/LED/EB  and peroxide curing applications.

SARBIO® 6201 is a difunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications.

SARBIO® 6202 is a difunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis.

SARBIO® 7107 is a pentafunctional epoxidised soy bean oil acrylate oligomer for use in UV/LED and EB curing applications.

SARBIO® 7201 is an hexafunctional polyester acrylate oligomer for use in UV/LED and EB curing applications.

SARBIO® 7201 is an hexafunctional polyester acrylate oligomer for use in UV/LED and EB curing applications.

SARBIO® 7202 is a tetrafunctional polyester acrylate oligomer for use in UV/LED and EB curing formulations.

SARET® 297F is a non nitroso scorch protected difunctional coagent for use in peroxide vulcanised rubber compounds.

SARET® 350W is a scorch protected trifunctional coagent for use in peroxide vulcanised rubber compounds.

SARET® 517 is a non nitroso scorch protected trifunctional coagent for use in peroxide vulcanised rubber compounds.

SB400 is an octofunctional acid based adhesion oligomer diluted with 30% of PGME for use in UV/LED and EB curing applications.

SB400 is an octofunctional acid based adhesion oligomer diluted with 30% of PGME for use in UV/LED and EB curing applications.

SpeedBlock 770 is a low molecular weight, easily dispersed, hindered amine light stabiliser (HALS) for use in polymer processing, coatings and adhesives. SpeedBlock 770 is typically used at 0.1 - 0.5% depending on the processing conditions and end application.

SpeedBlock DP74 is a fluorescent whitening agent, with excellent stability in low pH systems, for use in ink and coating applications. SpeedBlock DP74 is used in warm white and pastel tones where the degree of whiteness of the paint/ink needs intensifying. SpeedBlock 74 will mask the yellow self colour of some formulations and will increase the deep tone of blue/black inks. SpeedBlock 74 is recommended for use at concentrations between 0.02 - 5.0%. The actual use level chosen depends on the particular application and end user requirements.

SpeedBlock OB-184 is a fluorescent whitening agent, with excellent chemical and thermal stability, for use in ink and coating applications. SpeedBlock OB-184 is used in white and pastel tones where the degree of whiteness of the paint/ink needs intensifying. SpeedBlock OB-184 will mask the yellow self colour of some formulations and will increase the deep tone of blue/black inks. SpeedBlock OB-184 is recommended for use at concentrations between 0.02 - 5.0%. The actual use level chosen depends on the particular application and end user requirements.

SpeedBlock UV-0 is a benzophenone type UV absorber for use in polymer processing, coatings and adhesives. SpeedBlock UV-0 is typically used at 0.1 - 5.0% depending on the substrate, processing conditions and end application.

SpeedBlock UV-6 is a highly polymer compatible benzophenone type UV absorber for use in polymer processing, coatings and adhesives. SpeedBlock UV-6 provides low odour and volatility during high temperature processing and is typically used at 0.1 - 5.0% depending on the substrate, processing conditions and end application.

SpeedBlock UV-9 is a highly efficient benzophenone type UV absorber for use in polymer processing, coatings and adhesives. SpeedBlock UV-9 is ideally suited for exterior coatings and is typically used at 0.1 - 5.0% depending on the processing conditions and end application.

SpeedBlock UV-92 is a blend of hindered amine light stabilisers (HALS) for use in polymer processing, coatings and adhesives. SpeedBlock UV-92 is ideally suited for exterior coatings and is typically used at 0.5 - 2.0% depending on the processing conditions and end application.

SpeedCure 2-ITX is a Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 259 and 383 nm. SpeedCure 2-ITX provides long wavelength sensitisation of appropriate photoinitiators and depth cure when used at 0.1-5 wt% and combined with an amine synergist in UV and LED curable formulations.

SpeedCure 2022 is a liquid formulation of photoinitiators, with absorption maxima at 243 and 280 nm. SpeedCure 2022 provides balanced curing in a broad range of applications when used at 0.5-5 wt% in UV curable formulations.

SpeedCure 210 is a formulation of Norrish Type I and Norrish Type II photoinitiators from the hydroxyacetophenone and benzophenone families, with an absorption maximum at 249 nm. SpeedCure 210 provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulations.

SpeedCure 2100 is a liquid formulation of photoinitiators, with absorption maxima at 228, 272 and 368 nm. SpeedCure 2100 provides excellent depth curing for a broad range of applications when used at 0.5-5 wt% in UV curable formulations.

SpeedCure 2959 is a water dispersible Norrish Type I photoinitiator from the hydroxyacetophenone family, with absorption maxima at 219 and 275 nm. SpeedCure 2959 provides low yellowing and surface cure when used at 0.5-5Iwt% in UV curable formulations.

SpeedCure 4265 is a liquid formulation of photoinitiators, with absorption maxima at 240, 273 and 380 nm. SpeedCure 4265 provides balanced curing in a broad range of applications when used at 0.5-5 wt% in UV curable formulations.

SpeedCure 500 is a formulation of Norrish Type I and Norrish Type II photoinitiators from the hydroxyacetophenone and benzophenone families, with an absorption maximum at 249 nm. SpeedCure 500 provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulations.

SpeedCure 510 is a formulation of Norrish Type I and Norrish Type II photoinitiators from the hydroxyacetophenone and benzophenone families, with an absorption maximum at 249 nm. SpeedCure 510 provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulations.

SpeedCure 7010 is a polymeric Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 257, 312 and 383 nm. SpeedCure 7010 provides long wavelength sensitisation of appropriate photoinitiators, depth cure, low odour and low migration when used at 0.1-8 wt% and combined with an amine synergist in UV and LED curable formulations.

SpeedCure 7010-L is a 40% active liquid polymeric Norrish Type II photoinitiator of the polymeric thioxanthone family. SpeedCure 7010-L provides long wavelength sensitisation of appropriate photoinitiators, depth cure, low odour and low migration when used at 0.1-10 wt% and combined with an amine synergist in UV and LED curable formulations.

SpeedCure 7045 is a liquid polymeric amine synergist of the aminobenzoate family. SpeedCure 7045 provides low odour, low migration and generates active species when used at 2-10 wt% and combined with Norrish Type II photoinitiators in UV and LED curable formulations.

SpeedCure 73 is a liquid Norrish Type I photoinitiator from the hydroxyacetophenone family, with an absorption maximum at 244 nm. SpeedCure 73 provides low yellowing and surface cure when used at 0.5-5 wt% in UV curable formulations.

SpeedCure 84 is a Norrish Type I photoinitiator from the hydroxyacetophenone family, with an absorption maximum at 244 nm. SpeedCure 84 provides low yellowing and surface cure when used at 0.5-5 wt% in UV curable formulations.

SpeedCure 937 is cationic photoinitiator of the iodonium hexafluoroantimonate family, with absorption maximum at 230 nm. SpeedCure 937 provides high reactivity and high solubility in cationic systems when used at 0.5-5 wt% in UV curable formulations and LED curable formulations when sensitised with thioxanthones.

SpeedCure 938 is cationic photoinitiator of the iodonium hexafluorophosphate family, with absorption maximum at 241 nm. SpeedCure 938 provides high reactivity and solubility in cationic systems when used at 0.5-5 wt% in UV curable formulations and LED curable formulations when sensitised with thioxanthones.

SpeedCure 939 is cationic photoinitiator of the iodonium borate family with absorption maximum at 258 nm. SpeedCure 939 provides high reactivity and solubility in cationic systems when used at 0.5-5 wt% in UV curable formulations and LED curable formulations when sensitised with thioxanthones.

SpeedCure 976 is a 50% active liquid cationic photoinitiator of the sulfonium hexafluoroantimonate family, with absorption maxima at 230 and 295 nm. SpeedCure 976 provides high reactivity in cationic systems when used at 0.5-5 wt% in UV formulations.

SpeedCure 976D is liquid cationic photoinitiator of the sulfonium hexafluoroantimonate family in a reactive diluent. With absorption maxia at 230 and 295 nm, SpeedCure 976D provides high reactivity in cationic systems when used at 0.5-5 wt% in UV formulations.

SpeedCure 976s is cationic photoinitiator of the sulfonium hexafluoroantimonate family, with absorption maxima at 230 and 295 nm. SpeedCure 976s provides high reactivity in cationic systems when used at 0.5-5 wt% in UV curable formulations.

SpeedCure 992 is a 40% active liquid cationic photoinitiator of the sulfonium hexafluorophosphate family, with absorption maxima at 230 and 295 nm. SpeedCure 992 provides high reactivity in cationic systems when used at 0.5-5 wt% in UV curable formulations.

SpeedCure BCIM is a photoinitiator of the hexaaryl bisimidazole (HABI) family, with absorption maximum at 264 nm. SpeedCure BCIM produces highly reactive species when used at 0.1-5 wt% and combined with appropriate co-initiators such as, LCV or thiols in UV and LED curable formulations.

SpeedCure BEDB is a liquid amine synergist of the aminobenzoate family. SpeedCure BEDB generates active species when used at 2-8 wt% in combination with Norrish Type II photoinitiators and reduces oxygen inhibition in UV and LED curable formulations.

SpeedCure BKL is a Norrish Type I photoinitiator from the acetophenone family, with an absorption maximum at 253 nm. SpeedCure BKL provides high reactivity and surface cure when used at 0.5-5wt% in UV curable formulations.

SpeedCure BMS is a Norrish Type II photoinitiator of the benzophenone family, with absorption maxima at 246 and 315 nm. SpeedCure BMS provides high reactivity, surface cure and depth cure when used at 0.5-5 wt% and combined with an amine synergist in UV and LED curable formulations.

SpeedCure BP is a Norrish Type II photoinitiator from the benzophenone family, with absorption maximum at 252 nm. SpeedCure BP provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulations.

SpeedCure BPO is a Norrish Type I photoinitiator from the phosphine oxide family, with absorption maxima at 281, 365 and 395 nm. SpeedCure BPO provides high reactivity and depth cure when used at 0.5-5 wt% in UV and LED curable formulations.

SpeedCure CPTX is a Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 257, 314 and 389 nm. SpeedCure CPTX provides long wavelength sensitisation of appropriate photoinitiators and depth cure when used at 0.1-5 wt% and combined with an amine synergist in UV and LED curable formulations.

SpeedCure DETX is a Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 261, 291 and 386 nm. SpeedCure DETX provides long wavelength sensitisation of appropriate photoinitiators and depth cure when used at 0.1-5 wt% and combined with an amine synergist in UV and LED curable formulations.

SpeedCure DMB is an amine synergist of the aliphatic amine family. SpeedCure DMB generates active species when used at 2-8 wt% in combination with Norrish Type II photoinitiators and reduces oxygen inhibition in UV and LED curable formulations.

SpeedCure EAQ is a Norrish Type II photoinitiator of the anthraquinone family, with absorption maxima at 256 and 327 nm. SpeedCure EAQ provides long wavelength sensitisation of appropriate photoinitiators and depth cure when used at 0.1-5 wt% in UV and LED curable formulations.

SpeedCure EDB is an amine synergist of the aminobenzoate family. SpeedCure EDB generates active species when used at 2-8 wt% in combination with Norrish Type II photoinitiators and reduces oxygen inhibition in UV and LED curable formulations.

SpeedCure EHA is a liquid amine synergist of the aminobenzoate family. SpeedCure EHA generates active species when used at 2-8 wt% in combination with Norrish Type II photoinitiators and reduces oxygen inhibition in UV and LED curable formulations.

SpeedCure EMK is a Norrish Type II photoinitiator of the benzophenone family and an amine synergist, with absorption maxima at 250 and 378 nm. SpeedCure EMK provides high reactivity and depth cure when used at 0.5-5 wt% and combined with an amine synergist in highly pigmented UV and LED curable formulations.

SpeedCure ITX is a Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 259 and 383 nm. SpeedCure ITX provides long wavelength sensitisation of appropriate photoinitiators and depth cure when used at 0.1-5 wt% and combined with an amine synergist in UV and LED curable formulations.

SpeedCure MBB is a Norrish Type II photoinitiator from the benzophenone family, with absorption maximum at 246 nm. SpeedCure MBB provides surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulations.

SpeedCure MBF is a liquid Norrish Type II photoinitiator of the benzoylformate family, with an absorption maximum at 244 nm. SpeedCure MBF provides very low yellowing and surface cure when used at 0.5-5 wt% in UV curable formulations.

SpeedCure MBP is a Norrish Type II photoinitiator from the benzophenone family, with absorption maximum at 259 nm. SpeedCure MBP provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulations.

SpeedCure PBZ is a Norrish Type II photoinitiator of the benzophenone family, with an absorption maximum at 290 nm. SpeedCure PBZ provides high reactivity, surface cure and depth cure when used at 0.5-5 wt% and combined with an amine synergist in UV and LED curable formulations.

SpeedCure PDO is a Norrish Type I photoinitiator from the oxime ester family, with absorption maximum at 259 nm. SpeedCure PDO provides high reactivity, low yellowing and low volatiles when used at 0.5-5 wt% in UV formulations for electronics applications.

SpeedCure TPO is a Norrish Type I photoinitiator from the phosphine oxide family, with absorption maxima at 267, 298 and 380 nm. SpeedCure TPO provides high reactivity and depth cure when used at 0.5-5 wt% in UV and LED curable formulations.

SpeedCure TPO-L is a liquid Norrish Type I photoinitiator from the phosphine oxide family, with absorption maxima at 274, 290 and 370 nm. SpeedCure TPO-L provides high reactivity and depth cure when used at 0.5-5 wt% in UV and LED curable formulations.

SpeedCure VLT is a titanocene photoinitiator with absorption maxima at 395 nm and 470 nm. SpeedCure VLT provides high reactivity and depth curing when used at 0.5-5% in UV, LED and visible light curable formulations. SpeedCure VLT also acts as an effective sensitizer for diaryliodonium type cationic photoinitiators and can therefore be used to promote cure of cationic formulations with visible light.

SpeedCure XFs is a formulation of difunctional and monofunctional Norrish Type I photoinitiators from the hydroxyacetophenone family, with an absorption maximum at 252 nm. SpeedCure XFs provides low yellowing, surface cure and increased reactivity when used at 0.5-5 wt% in UV curable formulations.

SpeedCure XFs01 is a difunctional Norrish Type I photoinitiator from the hydroxyacetophenone family, with an absorption maximum at 258 nm. SpeedCure XFs01 provides low yellowing, surface cure and high reactivity when used at 0.5-5 wt% in UV curable formulations.

SR205H is a difunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications.

SR206 is a difunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications.

SR206 is a difunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications.

SR210CG is a difunctional methacrylic monomer for use in UV/LED/EB and peroxide curing coatings applications or as a co-monomer for polymer synthesis.

SR210HH is a difunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications or as a co-monomer for polymer synthesis.

SR214 is a difunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications or as a co-monomer for polymer synthesis.

SR217 is a monofunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis.

SR238 is a difunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis.

SR289CG is a difunctional methacrylic monomer for use in UV/LED/EB and peroxide curing coatings applications.

SR239EU is a difunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications.

SR252 is a difunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications or as a co-monomer for polymer synthesis.

SR256 is a monofunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis.

SR257C is a monofunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis.

SR257C is a monofunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis.

SR259 is a difunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis.

SR295 is a tetrafunctional acrylic monomer for use in UV/LED and EB curing applications.

SR306 is a difunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis.

SR306 MB is the Mass Balance version of SR306 with a Bio-attributed content of 40%. It allows a significant reduction of the product carbon footprint compared to its fossil version. SR306 MB achieves exactly the same performance as SR306 and can be readily used and implemented as a direct drop-in.

SR313A is a monofunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications or as a co-monomer for polymer synthesis.

SR324 is a monofunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications or as a co-monomer for polymer synthesis.

SR335 is a monofunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis.

SR339 NS is a monofunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis.

SR339C is a monofunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis.

SR341 is a difunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis.

SR344 is a difunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis.

SR348C is a difunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications.

SR349 is a difunctional acrylic monomer for use in UV/LED and EB curing applications.

SR350CG is a trifunctional methacrylic monomer for use in UV/LED/EB and peroxide curing coatings applications.

SR350D is a trifunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications.

SR351 is a trifunctional acrylic monomer for use in UV/LED and EB curing applications.

SR355 is a tetrafunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications.

SR368 is a trifunctional acrylic monomer for use in UV/LED and EB curing applications.

SR395 is a monofunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis.

SR395 NS  is a monofunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis.

SR399 is a hexafunctional acrylic monomer for use in UV/LED and EB curing applications.

SR399LV is a pentafunctional acrylic monomer for use in UV/LED and EB curing applications.

SR399LV is a pentafunctional acrylic monomer for use in UV/LED and EB curing applications.

SR420 is a monofunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis.

SR421A is a monofunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications or as a co-monomer for polymer synthesis.

SR444F is a trifunctional acrylic monomer for use in UV/LED and EB curing coatings applications.

SR444F is a trifunctional acrylic monomer for use in UV/LED and EB curing coatings applications.

SR454 is a trifunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications.

SR454 MB is the Mass Balance version of SR454 with a Bio-attributed content of 43%. It allows a significant reduction of the product carbon footprint compared to its fossil version. SR454 MB achieves the same performance as SR454 and can be readily used and implemented as a direct drop-in.

SR455 is a trifunctional acrylic monomer for use in UV/LED and EB curing applications.

SR484 is a monofunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis.

SR489 is a monofunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis.

SR492 is a trifunctional acrylic monomer for use in UV/LED and EB curing applications.

SR494 is a tetrafunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications.

SR495B is a monofunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis.

SR499 is a trifunctional acrylic monomer for use in UV/LED and EB curing applications.

SR508 is a difunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis.

SR508 MB is the Mass Balance version of SR508 with a Bio-attributed content of 50%. It allows a significant reduction of the product carbon footprint compared to its fossil version. SR508 MB achieves exactly the same performance as SR508 and can be readily used and implemented as a direct drop-in.

SR531 is a monofunctional acrylic monomer for use in UV/LED and EB curing applications.

SR540 is a difunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications.

SR548 is a monofunctional methacrylic monomer for use in UV/LED and EB curing coatings applications or as a co-monomer for polymer synthesis.

SR550 is a monofunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications or as a co-monomer for polymer synthesis.

SR551EU is a monofunctional methoxy polyethyleneglycol acrylate monomer for use in copolymerization and UV/LED/EB curing applications.

SR551EU is a monofunctional methoxy polyethyleneglycol acrylate monomer for use in copolymerization and UV/LED/EB curing applications.

SR552 is a monofunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications or as a co-monomer for polymer synthesis.

SR594 is a tetrafunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications.

SR597 is a high performance monofunctional methacrylic monomer for use as co-monomer for polymer synthesis.

SR610 is a difunctional acrylic monomer for use in UV/LED and EB curing applications or as a co-monomer for polymer synthesis.

SR789 is a monofunctional acrylic monomer for use in UV/LED and EB curing applications.

SR833S is a difunctional acrylic monomer for use in UV/LED and EB curing applications.

SR834 is a difunctional methacrylic monomer for use in UV/LED/EB and peroxide curing applications.

SR9003 is a difunctional acrylic monomer for use in UV/LED and EB curing applications.

SR9020 is a trifunctional acrylic monomer for use in UV/LED and EB curing applications.

SR9020 MB is the Mass Balance version of SR9020. It combines both bio-segregated and mass balance approaches with a total bio-content of 57% (14% coming from a bio-segregated feedstock and 43% being bio-attributed). It allows a significant reduction of the product carbon footprint compared to its segregated equivalent SR9020.SR9020 MB achieves exactly the same performance as SR9020 and can be readily used and implemented as a direct drop-in.

SR9035 is a trifunctional acrylic monomer for use in UV/LED and EB curing applications.

SR9049 is a trifunctional acrylic monomer for use in UV/LED and EB curing applications.

SR9050 is an acid based adhesion promotor for use in UV/LED and EB curing applications.

SR9051P is an acid based adhesion promotor for use in UV/LED and EB curing applications.

SR9054 is an acid based adhesion promotor for use in UV/LED and EB curing applications.